WPD FS SENSUS

WPD FS SENSUS - 1
360°
WPD FS SENSUS - 3 WPD FS SENSUS - 4 WPD FS SENSUS - 5
WPD FS SENSUS - 6
360°
WPD FS SENSUS - 7
WPD FS SENSUS - 8
WPD FS SENSUS - 9
WPD FS SENSUS - 10

Turbine flow converter (meter) of hot water

Hot water flow converters (meters) turbine flanged WPD FS are used to measure the volume of hot water with a maximum temperature of up to 130 °C (short-term up to 150 °C for 1 hour or a day) and a working pressure of up to 1.6 MPa, as well as as a component of mechanical heat energy meters or cold metering. Volume measurement at high rates with exceptional overload resistance.

Brief characteristics
Measurement typeMechanical
ConnectionDN 15 - 40 mm
Accuracy class3 (DN 15 - Ду 20 mm), 2 (DN 25 - DN 40 mm)
The qp/qi ratio1:50, to order - 1:100
Water temperature (heat transfer)130°C
ProtectionIP54
Inatallation Horizontal / to order Vertical with water supply from below (SAN) or above (FAN) in a special housing
MaterialBrass
Data communicationBuilt-in reed switch pulse transmitter with a multiplicity of 10 liters / pulse
Connection typeCarved / to order Flanged (for DN 20 - DN 40 mm)
Application
  • Heating points
  • Household and industrial accounting
  • Flow converter as part of a mechanical heat meter
  • Other facilities with constant or periodic consumption of hot water, or heat metering (as part of a heat meter) and cold metering (as part of a cold meter) and installation in dry or wet rooms
Features
  • Calibration interval 4 years.
  • Accuracy class 3 according to the Technical Regulations.
  • Counter for measuring the volume of hot water up to 130°C (up to 150°C for one hour per day).
  • Counter for measuring the volume of cold water from +10°C.
  • The degree of protection IP 68 allows you to work in a flooded state, that is, to operate the device both indoors and outdoors (well).
  • The counting mechanism can rotate 350°.
  • Counter installation: horizontal or vertical.
  • High-quality gray cast-iron counter housing.
  • The possibility of connecting a reed pulse transmitter Reed RD022 or an optical pulse transmitter OD.
  • The possibility of connecting the PulseRF radio module + the Reed RD022 reed switch pulse transmitter, which is intended for the integration of counters into the SensusRF wireless radio network for remote data collection.
  • Direct soothing sections are at least 3 x DN before the meter and at least 1 x DN after.
Documentation WPD FS Catalogue WPD FS Passport WPD FS Type-examination Certificate WPD FS Declaration of Compliance
Thank you for your application

Our manager will contact you shortly to clarify the terms of delivery.

Calculate estimate

Our specialist will contact you and advise on the cost of services

Thank you for your application

Our manager will contact you shortly to clarify the terms of delivery.