AN130 SENSUS

AN130 SENSUS - 1
360°
AN130 SENSUS - 3 AN130 SENSUS - 4 AN130 SENSUS - 5 AN130 SENSUS - 6
AN130 SENSUS - 7
360°
AN130 SENSUS - 8
AN130 SENSUS - 9
AN130 SENSUS - 10
AN130 SENSUS - 11
AN130 SENSUS - 12

Multi-stream vane flow converter (meter) of hot water

Vane, multi-stream, dry-running hot water flow converters (meters) AN 130 with a built-in pulse transmitter are used to measure the volume of hot water with a maximum temperature of up to 130 °C and a working pressure of up to 1.6 (on order up to 2.5 MPa), and also as a component of mechanical heat energy meters.

Due to its metrological and design features and built-in pulse transmitter, it is ideal for installation in hot water metering and heat supply systems.

Brief characteristics
Measurement typeMechanical
ConnectionDN 15 - 40 mm
Accuracy class3 (DN 15 - Ду 20 mm), 2 (DN 25 - DN 40 mm)
The qp/qi ratio1:50, to order - 1:100
Temperature class130°C
ProtectionIP54
Inatallation Horizontal / to order Vertical with water supply from below (SAN) or above (FAN) in a special housing
MaterialBrass
Data communicationBuilt-in reed switch pulse transmitter with a multiplicity of 10 liters / pulse
Connection typeCarved / to order Flanged (for DN 20 - DN 40 mm)
Application
  • Heating points
  • Household and industrial accounting
  • Flow converter as part of a mechanical heat meter
  • Other objects with constant or periodic consumption of hot water or heat accounting (as part of a heat meter) and installation in dry rooms
Features
  • Calibration interval 4 years.
  • Accuracy class 3 (DN 15 - DN 20 mm) and 2 (DN 25 - DN 40 mm) according to the Technical Regulations.
  • Flow converter (meter) of hot water up to 130°C.
  • Built-in reed switch pulse transmitter in the counting mechanism with a multiplicity of 10 liters / pulse.
  • For ease of reading readings, the counter mechanism can rotate around the vertical axis by 330 °
  • Installation of the meter in a horizontal position with the counting mechanism up, on request vertically with water supply from below (SAN) or above (FAN) in a special housing.
  • High-quality brass case of the counter.
  • The possibility of connecting the PulseRF radio module, which is designed for the integration of counters into the SensusRF wireless radio network for remote data collection.
  • Direct calming areas before and after the meter are at least 3 x DN.
Documentation AN 130 Declaration of Compliance AN 130 Catalog AN 130 Passport AN 130 Type-examination Certificate
Thank you for your application

Our manager will contact you shortly to clarify the terms of delivery.

Calculate estimate

Our specialist will contact you and advise on the cost of services

Thank you for your application

Our manager will contact you shortly to clarify the terms of delivery.