Application
- Fire distribution networks
- Household and industrial accounting
- Wells
- Other facilities with seasonal or wide fluctuations in costs and installation in dry or wet rooms
WPV-MS 150 SENSUS
Високоточний комбінований лічильник холодної
The combined flanged meter WPV-MS (D 150 mm) is used to measure the volume of cold drinking or technical water, the flow of which can vary within very wide limits, with a maximum temperature of up to 30 °C and a working pressure of up to 1.6 MPa.
There are 3 devices in one compact housing: the main one is a turbine meter for large flows, an additional one is a volumetric piston meter for small flows and a switching valve with low pressure loss and high throughput.
Brief characteristics
Measurement typeMechanical
ConnectionDN 150 mm
Measurement rangeR2500
Pressure loss classΔp 63
Temperature classT30
ProtectionIP68
Inatallation Horizontally (counting mechanism up)
MaterialMain - gray cast iron / additional - brass
Data communicationPossibility of connecting pulse module and M-Bus: main and additional HRI-Mei B4; optical pulse transmitter on the main and additional OD or radio module: main and additional PulseRF HRI-Mei
Connection typeFlange
Features
- Calibration interval 4 years.
- Measuring range R2500 according to the Technical Regulations.
- Counter for measuring the volume of cold water up to 30°C.
- There are 3 devices in one compact case: the main one is a turbine meter for accounting for large costs, an additional one is a volumetric piston meter for accounting for small costs and a switching valve with low pressure loss and high throughput.
- The volume of water passing through the combined meter is the sum of the readings of both counting mechanisms of the water meters (main and additional).
- The degree of protection IP 68 allows you to work in a flooded state, that is, to operate the device both indoors and outdoors (well).
- The counting mechanisms can rotate 330°.
- Installation of the counter only in a horizontal position with the counter mechanism up.
- High-quality gray cast-iron housing of the main meter and brass housing of the additional meter.
- Wide measurement range.
- Compatibility with pulse and data transmission modules via the M-Bus channel: the main and additional HRI-Mei B4, which are designed for the integration of meters into wired networks of remote data collection.
- The possibility of connecting radio modules: the main and additional PulseRF HRI-Mei, which are designed for the integration of meters into the wireless radio network of remote collection of indicators SensusRF.
- Flow profile sensitivity class: U0D0.
Thank you for your application
Our manager will contact you shortly to clarify the terms of delivery.